PI2AES - PRO AUDIO SHIELD
AES TRANSMITTER – The industry standard WM8804 converts the RPi I2S stream to AES3/SPDIF formatted data at 24-Bit up to 192Khz Frame Rate
SPDIF COAX OUTPUT – An RCA connector with Isolation Transformer provides coaxial transmission of the SPDIF Audio Data Stream.
SPDIF OPTICAL OUTPUT – Isolated Optical Transmitter Supports Consumer Level DAC and AVR inputs
AES BNC OUTPUT - A 75 ohm BNC connector with Isolation Transformer provides for Single Ended AES transmission.
AES BALANCED OUTPUT – An RS-422 Transmitter coupled with Isolation Transformer allows the transmission of balanced audio data with 110 ohm impedance via the Professional Audio Standard XLR Connector
BUFFERED I2S OUTPUT – Parallel Buffered I2S is available for direct short distance connection to off-board D/A. Perfect for DIY use! I2C for control is also provided as well as 5V Regulated and Input Voltage Rails
DIFFERENTIAL I2S OUTPUT – A DS2063 Differential Transmitter is used to drive the I2S Bus via LVDS over a standard HDMI Connector. The Pinout is compatible with Gustard I2S Interface. PS Audio is possible, but the left/right channels will be swapped.
***Current lead time is 2-3 weeks from time of order***
***Raspberry Pi is not included. Case and Power Supply sold separately ***
***PI2AES Power Jack is 2.5MM, Meanwell PSU uses 2.1MM, adapter is required***